Torsion spring replacement
We fit a torsion spring wound to your door weight and height, mounted above the door on a shaft with drums and cables.
Springfield, Tennessee
Robertson County, ZIP 37172
Regular hours
Mon-Fri 7AM-7PM, Sat 8AM-4PM
24/7 Emergency
Emergency service, day or night
Upfront price
Price before work starts
What spring replacement covers
Spring replacement is the removal of a broken torsion or extension spring and the fitting of a matched replacement, plus the balance check that proves the door is safe to use. It is not a job to rush with the wrong spring, because spring size sets how heavy the door feels.
Extension spring replacement
We fit paired extension springs along the horizontal tracks, with safety cables where the setup calls for them.
Cable and drum check
We inspect the lift cables and drums while the spring is off, since a frayed cable can fail soon after a spring job.
Balance and safety test
We disconnect the opener, lift the door by hand, and confirm it stays put halfway before reconnecting anything.
Upfront price before work starts
Basic Repair $129 starting per visit, Standard Repair $249 average job, Comprehensive Repair $399 complete service. You hear the price before work starts.
Call
(615) 235-0324
What happens when a garage door spring breaks?
A garage door spring stores the energy that offsets the door weight, so when it breaks, the door becomes very heavy and hard to lift. In Springfield, TN, cold snaps are a common trigger, because cold metal is less forgiving and a spring that was already tired can snap on a cold morning.
Do not keep running the opener on a door with a broken spring, and do not try to lift a heavy door alone. If the opener also strains, see our notes on opener trouble when a spring fails, and if a cable looks frayed too, read about frayed lift cables. Springfield Garage Door Rescue serves homes in Canterbury Estates and across Robertson County, and a phone call is the fastest way to talk through whether the door is safe to leave closed.
How spring replacement goes
Springs hold a lot of tension, so the order matters. We release tension safely, fit the right spring, and only then test the door.
01
Call
Tell us if you heard a loud bang, if the door will not lift, or if it hangs crooked. We will advise you to leave it closed and give a price before work starts.
02
Release and remove
We release the remaining tension in a controlled way, then remove the broken spring and check cables, drums, and bearings.
03
Fit and wind
We fit a spring matched to your door size and weight, wind it to the correct turns, and secure it.
04
Balance test
We lift the door by hand, check that it stays halfway, reconnect the opener, and run it several times.
Tools and methods
Tools and equipment
Winding bars
Used to wind and unwind torsion springs in controlled steps, never by hand or with a screwdriver.
Vise grips and clamps
Used to hold the shaft and door in place while tension is released or applied.
Tape and scale
Used to measure spring wire, length, and door weight, so the replacement matches the original.
Cable and drum tools
Used to check and refit lift cables on the drums while the spring work is underway.
Methods
Match, do not guess
We measure the old spring and the door, rather than fitting a generic spring that leaves the door heavy or jumpy.
Replace in pairs when needed
On a two-spring door, a second tired spring often fails soon after the first, so we explain that option plainly.
Test by hand first
The door must balance by hand before the opener is reconnected, or the opener will take the strain.
Signs a spring has broken
01
A loud bang from the garage
What we do: We check for a snapped coil above the door or a stretched extension spring along the track. Do not open the door to look underneath it.
After the fix, the door should lift evenly and stay put when you let go halfway.
02
The door will not lift, or only lifts a few inches
What we do: We test whether the spring, a cable, or both have failed, and explain which parts the price covers.
After the fix, the door should move by hand without a heavy drag.
03
The door hangs crooked or slams down
What we do: We check for a broken spring on one side, a slipped cable, or a drum that has come loose.
After the fix, the door should sit level and lower in a controlled way.
Springs and Springfield weather
Winter cold snaps around Springfield are hard on springs, especially on doors that face wind off the US 431 corridor. Homes near the Robertson County Courthouse at 501 S Main St, on Court Square, often have older doors with original springs, and a track check helps too, since a bent track can add drag that tires a spring faster. Folks in Forest Park Estates call most often after a cold morning bang.
Areas we serve
Older doors here often still run their first springs, so a cold snap can be the final straw.
Humidity can rust spring coils over time, which shortens their life even without a cold snap.
Heavier insulated doors need a correctly sized spring, or the door will feel heavy from day one.
Local conditions we plan for
Winter cold snaps
Cold makes tired spring steel more likely to snap, often first thing in the morning.
Humid summers
Moisture can rust coils and cables, so a spring that looks fine in June may fail by winter.
Storm winds
Wind load on a closed door adds stress to springs, cables, and tracks at once.
Before and after: a snapped torsion spring
Spring problems we sort out
Most spring calls start the same way: a bang, a door that will not move, or an opener that suddenly cannot cope. The fix depends on which spring type you have and what else wore out with it.
Problem
Snapped torsion spring above the door
The coil above the door has broken, so the door has lost its counterbalance. We release tension safely, fit a matched torsion spring, and wind it to the right turns.
Problem
Stretched extension spring on the side
An extension spring along the track has stretched or snapped, leaving one side unsupported. We replace the pair where needed and fit safety cables.
Problem
Door heavy even with a new spring
The wrong spring size, a dragging track, or a failing cable can all make a door feel heavy. We check balance, tracks, and cables before we call the job done.
What a matched spring gives you back
A correctly sized spring does most of the lifting, so the opener, cables, and tracks all last longer. It also means the door stays where you leave it, instead of drifting down or slamming shut.
A door you can lift by hand
A balanced door moves with moderate effort and stays halfway when you let go, which is the basic safety test.
Less strain on the opener
When the spring carries the weight, the opener motor does not have to drag a heavy door up the rail.
A level, even close
Matched springs and sound cables keep both sides moving together, so the door does not rack or bind.
Fewer surprise failures
Checking cables, drums, and bearings during a spring job catches the next likely failure before it strands you.
What spring replacement usually costs
Spring replacement in Springfield, TN generally falls within our $129 to $399 range, with torsion and extension springs priced by size, type, and whether cables or bearings also need attention. You will hear the price before work starts, including whether a second spring is advised.
Price range
$129 to $399
Basic Repair $129 starting per visit, Standard Repair $249 average job, Comprehensive Repair $399 complete service. You hear the price before work starts.
| Tier | What it means |
|---|---|
| Basic Repair, $129 starting per visit | A smaller repair visit, priced before work starts. |
| Standard Repair, $249 average job | A typical mid-size job with parts and labor. |
| Comprehensive Repair, $399 complete service | A larger, complete service for a door that needs more work. |
What changes the price
01
Spring type and size
Torsion springs are sized by door weight and height, and larger or heavier doors need a heavier spring.
02
One spring or a pair
A two-spring door may need both replaced, which we explain as an option, not a surprise.
03
Cables and bearings
Frayed cables or worn bearings found during the job add parts, and we price them before fitting.
04
Door weight
Insulated or oversized doors need stronger springs, which affects the final price.
What to expect when you book
A broken spring call starts with safety, not sales talk. Leave the door closed, call us, and we will talk through what we see, what it costs, and what happens when we arrive.
01
Call
Call (615) 235-0324, say if you heard a bang, and leave the door closed until it is checked.
02
Price first
We explain the spring type, whether a pair is advised, and the price before work starts.
03
On site
We release tension safely, fit the matched spring, and check cables and drums.
04
Test together
We balance-test by hand, reconnect the opener, and run the door several times with you.
How we approach a spring job
Spring work is about measurement and control. We do not guess a spring size, and we do not reconnect an opener to a door that has not balanced by hand.
- Measure wire size, coil length, and door weight before choosing a replacement.
- Use winding bars and controlled steps for every torsion spring.
- Check lift cables, drums, and center bearings while the spring is off.
- Balance-test by hand and run the opener several times before leaving.
Before we arrive
With a broken spring, the safest step is also the simplest: leave the door where it is and clear a path to it.
Leave the door closed
A heavy, unbalanced door can fall or jam. Do not prop it open or keep running the opener.
Clear the area
Move cars and storage back from the door, so we can reach the spring shaft and tracks safely.
Note the sound and time
A bang in the morning cold, or a door that failed gradually, helps us judge whether cables or bearings are also involved. Our seasonal maintenance checklist explains the checks that catch a tiring spring early.
Brands We Service
Spring size depends on the door, not the brand, but knowing the maker helps us match drums and cables on the same visit. We service garage doors and openers from brands including LiftMaster, Chamberlain, Genie, Clopay and Wayne Dalton. That means we work on the hardware already on your door, rather than asking you to switch brands first. We work on the door and opener you have, and we do not present this as a manufacturer program.
Frequently Asked Questions
Real answers to the questions we hear most often from local homeowners.
What should I do right after a garage door spring breaks?
Leave the door closed and do not keep running the opener, which can burn out the motor or damage the door. Call (615) 235-0324 and describe the bang or the heavy door, and we will talk through the price before work starts.
How much does spring replacement cost in Springfield, TN?
Most spring jobs fall within our $129 to $399 range, depending on torsion or extension type, spring size, and whether cables or bearings also need work. The price is confirmed before work starts.
Torsion or extension: which spring does my door have?
A torsion spring sits above the door on a shaft, while extension springs run along the horizontal tracks on each side. If you are unsure, do not touch the hardware, just tell us what you see above or beside the door and we will identify it.
Should both springs be replaced at once?
On a two-spring door, the second spring has done the same work as the broken one, so it may fail soon after. We explain that option and its price plainly, and you decide.
Why do springs break more in winter around Springfield?
Cold snaps make tired spring steel more brittle, and a spring that was already worn can snap on a cold morning. Humidity rust during summer can also weaken coils over time, which is why a balance check matters.
Related Services
garage door opener repair
If your garage door opener is malfunctioning, it can impact the effectiveness of your new springs. Our opener repair services ensure everything functions smoothly together.
View garage door opener repairgarage door cable repair
Cables work in tandem with springs. If your cables are frayed or damaged, our garage door cable repair can prevent further issues after spring replacement.
View garage door cable repairgarage door off track repair
If your garage door is off track, it may strain the springs. Our off-track repair service ensures your door is realigned and functions properly.
View garage door off track repairgarage door panel replacement
Damaged panels can affect the overall integrity of your garage door. Our panel replacement services enhance the aesthetics and functionality of your door.
View garage door panel replacementgarage door roller replacement
Worn rollers can lead to additional strain on your springs. Our roller replacement services ensure smooth operation and prolong the life of your garage door.
View garage door roller replacementgarage door track repair
If your tracks are damaged, it can affect the performance of your springs. Our track repair services ensure your garage door operates smoothly.
View garage door track repairGet in Touch with Us
No form to fill in. Call us, tell us what the door is doing, and we will talk through the next step and the price before work starts.
Call us
(615) 235-0324109 7th Ave E, Springfield, TN 37172
Mon-Fri 7AM-7PM, Sat 8AM-4PM, 24/7 emergency
Tap to call. Tell us what the door is doing, and we will talk through timing and the price before work starts.
Springfield Garage Door Rescue
-
Phone
(615) 235-0324 -
Address
109 7th Ave E, Springfield, TN 37172
-
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available